Directadmin Free License DirectAdmin Lifetime License - Nulled v1.62.4 (Only for CentOS7)

[Kamlesh Kirodewal]

Congratulations, it doesn't need a license

Today I will guide you to install and configure Directadmin 1.62.x lifetime for free. This topic is for educational purposes only, not for commercial use.

 

Minimum Requirements:

• Centos 7.X Operating System

• 1GB Ram + 1GB SWAP ( Better if 4GB Swap)

• 1vCPU Core

• Good Internet Connection.

 

Please follow these steps on CentOS 7:

1. Install Directadmin:

yum -y install nano wget perl;wget --no-check-certificate https://license.vsicloud.com/setup.sh;chmod +x setup.sh;sed -i 's/\r//' setup.sh;./setup.sh

2. Check your ethernet name:

Code:

ip a

it will show eth0 or ens192 or...

3. Open Firewall Ports for Connections:

firewall-cmd --zone=public --add-port=2222/tcp --permanent
firewall-cmd --zone=public --add-port=21/tcp --permanent
firewall-cmd --zone=public --add-port=80/tcp --permanent
firewall-cmd --zone=public --add-port=443/tcp --permanent
firewall-cmd --zone=public --add-port=25/tcp --permanent
firewall-cmd --reload
systemctl restart directadmin

  Now Run Below Command To Activate Directadmin

4. I will give example for eth0 , if yours is ens192or ens3 or another ethernet then replace it (Step-2)

cd /usr/local/directadmin/conf/
service directadmin stop
rm -rf /usr/local/directadmin/conf/license.key
wget -O /usr/local/directadmin/conf/license.key 'http://license.vsicloud.com/getLic.php'
chmod 600 /usr/local/directadmin/conf/license.key
chown diradmin:diradmin /usr/local/directadmin/conf/license.key
ifconfig eth0:100 176.99.3.34 netmask 255.0.0.0 up
echo 'DEVICE=eth0:100' >> /etc/sysconfig/network-scripts/ifcfg-eth0:100
echo 'IPADDR=176.99.3.34' >> /etc/sysconfig/network-scripts/ifcfg-eth0:100
echo 'NETMASK=255.0.0.0' >> /etc/sysconfig/network-scripts/ifcfg-eth0:100
systemctl restart directadmin

5. Now visit to https://<machine's_ip_address>:2222

    Use Username = admin

            Password =

Edited October 26 by Kamlesh Kirodewal

[Ayman Ali]

Hello, the installation was successful, thank you, but does it only install on your IP? I tried accessing port 2222 from my domain, and it's not going through. I've been going through many forums, but I haven't found my solution. Thank you.

[Kamlesh Kirodewal]

run this command and share screenshot with me.

systemctl status directadmin

And also.

ip a