2 hours ago, dentos said:

@Magd Almuntaser I’ve upgraded to version 11.4.0 following your instructions. The system runs fine, single messages work, but broadcast is still stuck in processing. Is there any extra step needed?

Thanks.

If you have previously processing campaigns, please delete them.
It's best to login into phpmyadmin, then go to the blast and campaigns tables and empty them.
Then create a new campaign and let me know the results.

3 hours ago, Magd Almuntaser said:

If you have previously processing campaigns, please delete them.
It's best to login into phpmyadmin, then go to the blast and campaigns tables and empty them.
Then create a new campaign and let me know the results.

I followed your advice. After emptying the blasts table, now the broadcast works normally again. Thank you for your guidance 🙏

14 hours ago, Magd Almuntaser said:

Sebelumnya ada pairing code, namun saya batalkan karena tidak diisi oleh team baliyes, jadi dihentikan untuk lain waktu.
port untuk perangkat?? Itu hanya satu port untuk nodejs.
Saat ada pembaruan, Anda akan melihat peringatan di panel kontrol yang menunjukkan adanya pembaruan baru. Klik peringatan tersebut dan pembaruan akan dilakukan secara otomatis.

Can the pairing code be continued? And if I continue, where do I need to edit it so that the pairing code works?

2 hours ago, dentos said:

I followed your advice. After emptying the blasts table, now the broadcast works normally again. Thank you for your guidance 🙏

Ok great, this issue will be fixed in the next release, as I noticed that if there is more than one campaign from the same user, he waits for his previous campaign to finish before starting the other one.. so I will make it so that it starts all campaigns even if the previous one has not finished..

1 hour ago, Project Downgrade said:

Can the pairing code be continued? And if I continue, where do I need to edit it so that the pairing code works?

I'll try to restore the pairing code to MPWA, but I hope the baliyes team has fixed their issues. There's a recent release of the library and major changes have occurred in their library, the first of which is that their library has been changed to ESM. Therefore, I might change the MPWA system to ESM in the next release to be compatible with their library.

18 minutes ago, Magd Almuntaser said:

Ok great, this issue will be fixed in the next release, as I noticed that if there is more than one campaign from the same user, he waits for his previous campaign to finish before starting the other one.. so I will make it so that it starts all campaigns even if the previous one has not finished..

I'll try to restore the pairing code to MPWA, but I hope the baliyes team has fixed their issues. There's a recent release of the library and major changes have occurred in their library, the first of which is that their library has been changed to ESM. Therefore, I might change the MPWA system to ESM in the next release to be compatible with their library.

OK, we will wait immediately, and in the future we can also use multiple accounts for sending.
I want to ask again, how do I install this on aapanel?
What should be filled in for Host? 127.0.0.1 or localhost



What should I fill in for the server type and do I need to fill in Generate SSL For Your NodeJS, because if I fill in the email and generate SSL certificate, I get an error?
I fill in the URL code with the website name




if i run qr status it doesn't work



Do you have a tutorial on installing an Aapanel VPS or a step-by-step guide? because i tried to install it on aapanel

16 minutes ago, Project Downgrade said:

OK, we will wait immediately, and in the future we can also use multiple accounts for sending.
I want to ask again, how do I install this on aapanel?
What should be filled in for Host? 127.0.0.1 or localhost



What should I fill in for the server type and do I need to fill in Generate SSL For Your NodeJS, because if I fill in the email and generate SSL certificate, I get an error?
I fill in the URL code with the website name




if i run qr status it doesn't work



Do you have a tutorial on installing an Aapanel VPS or a step-by-step guide? because i tried to install it on aapanel

It seems that you are new to MPWA..
MPWA can be used with multiple accounts and multiple devices, and you can discover its options yourself.

Install:
https://mpwa.onexgen.com/docs/?doc=3914b353

https://www.youtube.com/watch?v=WCvGRWuwndY

54 minutes ago, Magd Almuntaser said:

It seems that you are new to MPWA..
MPWA can be used with multiple accounts and multiple devices, and you can discover its options yourself.

Install:
https://mpwa.onexgen.com/docs/?doc=3914b353

https://www.youtube.com/watch?v=WCvGRWuwndY

it uses cpanel, is it the same?

Alguem poderia me ajudar? Estou com esse problema no WebSocket, estou utilizando aaPanel.

1 hour ago, Project Downgrade said:

it uses cpanel, is it the same?

21 minutes ago, Fabricio Lopes said:

Alguem poderia me ajudar? Estou com esse problema no WebSocket, estou utilizando aaPanel.

https://youtu.be/VgWgWQyNI7o?si=CM2MxB-kaY_fFzqm

I click generate SSL Certificate Error



and why is it still not connected, I installed it on aapanel vps server

2 minutes ago, Project Downgrade said:

I click generate SSL Certificate Error



and why is it still not connected, I installed it on aapanel vps server

You need to see page number 43 to know how to use SSL
and don't forget to go to trubleshot page to see your problem before post here

is there no video

33 minutes ago, Magd Almuntaser said:

You need to see page number 43 to know how to use SSL
and don't forget to go to trubleshot page to see your problem before post here

is there no video ?

49 minutes ago, Project Downgrade said:

Clico em gerar erro de certificado SSL



e por que ainda não está conectado, instalei no servidor vps aapanel

está usando aaPanel? comigo resolveu quando troquei Apache por Nginx..

7 hours ago, Magd Almuntaser said:

You need to see page number 43 to know how to use SSL
and don't forget to go to trubleshot page to see your problem before post here

I've seen what you gave on page 43
I’m having difficulties with point 11 – Open the website again, click on Node Project and click on Not Set:

Our domain is already set in the PHP project (subdomain.nameweb.com), but we are instructed to create it again under the Project tab.

If I enter the domain, it says the domain already exists.
If I don’t enter the domain, I can’t get the certificate holder.

Previously, in point 4 – Go to website and click Not Set (Under SSL), I already created it in the PHP project.
I don’t understand what this step actually means.

This message appears when I try to get the Certificate Holder.



It turns off automatically and I can’t do the mapping.
If I turn it on, this message appears.




If I enter my domain in the Node Project (subdomain.nameweb.com), it doesn’t work. It always shows:

“This port is already occupied, please modify your project port, port: 3100.”

If I change the port, it shows:

“Domain name already exists: subdomain.nameweb.com:80.” What is the solution? Don’t you have a video tutorial for this?

How To Run.docx

Edited 2 hours ago2 hr by Project Downgrade