5 hours ago, kreativez kreata said:

Only issue I face after upgrade is with the send-message endpoint when making API calls. I am still on version 11.3. Any help will be appreciated. Thanks.

Are you using 11.5.1?

3 hours ago, Shaaz Sha said:

@Magd Almuntaser 

Dear I have tried cloudflare tunnel and non cloudflare tunner with aapanel both all working only the issue nodejs

So can you take AnyDesk to fix this issue if you are free

I never recommend using a Cloudflare tunnel if you're running a live website on a real host.

Only use a Cloudflare tunnel if you're on your localhost machine.

If you're on a real host and using aapanel, go to page 43, where there's an explanation of how to use aapanel with Cloudflare.

1 hour ago, Juxhin said:

when trying to update. anyone have this problem?

Try again because sometimes my official website is down for a minute for maintenance, so try again and it will work.

1 hour ago, Crypto Dash said:

Hello, When I am clicking update button its redirecting me to domain/update.php which is showing You don't have permission to access this resource.
so i Temporarily disabled the execution of both command-before.php and command-after.php in the UpdateController

and One feature request is

can we update user via api? i know we have only create user api but how about update subscription via api. i can create myself as well but this is good if you add this directly? looking forward

The worst decision you could make is to disable the two files you mentioned. The two files you mentioned are for updates, and disabling them will cause your site to crash immediately with the next update, because these two files contain the commands I execute with each update.

Let me explain:

When you click "update," your site downloads an update.zip file from within my site containing only the updated files, and a "before" and "after" file. These two files contain commands for modifying files and adding commands without replacing your files. When you disable these two files, the next update will unzip the update.zip file without executing the commands, and your site will crash.

Therefore, I will not provide you with any technical support later, because your problem lies with these two files.

About modifying a user via API, it has not been done yet, but I will try to do it in the upcoming versions, which you will not benefit from because your site will be broken becouse you don't have the before and after files 😅

44 minutes ago, adit_a said:

@kreativez kreata Can you provide the settings? I'm also using aaPanel, but still can't connect. thanks

https://youtu.be/VgWgWQyNI7o?si=CM2MxB-kaY_fFzqm

https://mpwa.onexgen.com/docs/?doc=3914b353

https://www.youtube.com/watch?v=WCvGRWuwndY

8 minutes ago, Magd Almuntaser said:

Are you using 11.5.1?

I never recommend using a Cloudflare tunnel if you're running a live website on a real host.

Only use a Cloudflare tunnel if you're on your localhost machine.

If you're on a real host and using aapanel, go to page 43, where there's an explanation of how to use aapanel with Cloudflare.

Try again because sometimes my official website is down for a minute for maintenance, so try again and it will work.

The worst decision you could make is to disable the two files you mentioned. The two files you mentioned are for updates, and disabling them will cause your site to crash immediately with the next update, because these two files contain the commands I execute with each update.

Let me explain:

When you click "update," your site downloads an update.zip file from within my site containing only the updated files, and a "before" and "after" file. These two files contain commands for modifying files and adding commands without replacing your files. When you disable these two files, the next update will unzip the update.zip file without executing the commands, and your site will crash.

Therefore, I will not provide you with any technical support later, because your problem lies with these two files.

About modifying a user via API, it has not been done yet, but I will try to do it in the upcoming versions, which you will not benefit from because your site will be broken becouse you don't have the before and after files 😅

https://youtu.be/VgWgWQyNI7o?si=CM2MxB-kaY_fFzqm

https://mpwa.onexgen.com/docs/?doc=3914b353

https://www.youtube.com/watch?v=WCvGRWuwndY

No no i don't mean this, that was causing issues to update, then i realize your site was down(where we are downloading zip), and i fixed that already, and my website is working nice again, because i thought command before execution making issue, looking forward for update user via api

@Magd Almuntaser same error me also getting my both server so this is application issue right i thought my server issue

8 hours ago, ABDULLAH BIN FAISAL said:

اشكرك جزيل الشكر اخ ماجد، بانتظارك وبانتظار ابداعك الله يسعدك يارب

يوجد موقع سله خاص بالمطورين ممكن يفيدك

https://docs.salla.dev/421119m0

لسوء الحظ ماقدرت اسجل فيه يطلب وجودي في الدول الي يدعمها فقط .. المشكله انا في اندونيسيا وحاولت اغير الاي بي لكن اكتشفني يقلي ممنوع تسجل عضوية بفي بي ان ..
وشفت الرابط الي ارسلته انت بس اشوف الموضوع طويل جداً علشان الواحد يفهمهم بس اسهل طريقة هي انك تستخدم ملف جديد ولنفرض يكون اسمه:
salla.php
حطه في مجلد:
public
الموجود داخل السكربت

بتقدر تشغل الملف كذا:
https://yoursite.com/salla.php

او حمله من المرفقات وجرب حط الويبهوك الي هو رابط عندهم وجرب سوي مشتريات او اي شيء مثلا الغي منتج او اي شيء
وروح شوف جنب ملف سله بتحصل ملف اسمه:
var.txt
بيكون داخله الطلبات الي طلبها موقع سله وارسله لي بالخاص بكذا بنعرف ايش الطلبات الي بتوصل لموقعك من سله وبقدر اقلك كيف تستقبلها بالطريقه الصحيحه

salla.php

4 minutes ago, Shaaz Sha said:

@Magd Almuntaser same error me also getting my both server so this is application issue right i thought my server issue

The world uses the script, so your problem is that you couldn't install it correctly, which I explained to you on page 43.
So I'll make the process easier for you. Send me your site data, and I'll install it for you and tell you what your mistakes are.
Don't forget to prepare for me the SSL files you got from Cloudflare.

2 hours ago, Magd Almuntaser said:

Are you using 11.5.1?

I am using 11.3.0. Any update I do after this version has throws an error only on the send-message endpoint api calls. All other api calls work fine. I have done all upgrades and had to restore 11.3.0.

20 minutes ago, kreativez kreata said:

  3 hours ago, Magd Almuntaser said:

Are you using 11.5.1?

This means that NodeJS is still running on the old version 11.3.0.

Even if you update, NodeJS is still running on the old files. The solution is to remove the app from NodeJS and create it again. You must first upgrade to 11.5.1, then go to NodeJS, delete the entire app, and create a new NodeJS.

1 hour ago, Shaaz Sha said:

@Magd Almuntaser same error me also getting my both server so this is application issue right i thought my server issue

There is no problem with this script, the problem is with us, if you are not used to using a VPS with a panel that you have never understood, it is better for you to use a VPS with a CPanel panel, it will be easier to run.

@Magd Almuntaser

I have used a reverse proxy to run my port without using Cloudflare’s ports, and it works fine.

But now I have a problem:

When installing the script on aaPanel and using PM2, it consumes the server’s CPU excessively. However, when running node server.js in the terminal, it does not consume that much CPU like PM2.

For reference, I’m using the wweb.js library in another project, which relies on WebDriver, but it does not normally consume this much CPU.

Is there a solution?

┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐

│ id │ name │ mode │ ↺ │ status │ cpu │ memory │

├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤

│ 0 │ wz_whatsapp_server │ fork │ 0 │ online │ 200% │ 1.1gb │

53 minutes ago, Abdulrahman Mohamed said:

@Magd Almuntaser

I have used a reverse proxy to run my port without using Cloudflare’s ports, and it works fine.

But now I have a problem:

When installing the script on aaPanel and using PM2, it consumes the server’s CPU excessively. However, when running node server.js in the terminal, it does not consume that much CPU like PM2.

For reference, I’m using the wweb.js library in another project, which relies on WebDriver, but it does not normally consume this much CPU.

Is there a solution?

┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐

│ id │ name │ mode │ ↺ │ status │ cpu │ memory │

├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤

│ 0 │ wz_whatsapp_server │ fork │ 0 │ online │ 200% │ 1.1gb │

Yes, you have a problem It may be related to PM2 itself, since the problem doesn't appear when using Node directly.

So I don't have a solution in mind, as I've only encountered this problem once, and the solution was to abandon PM2 and switch directly to NodeJS.

Dear @Magd Almuntaser , I am running the cron after creating the campaign, but it is still showing as in progress, it is not sending any messages, there is only a problem with the campaign part. I have made the latest update, and when we run the cron, it shows 0 on the screen.

@Magd Almuntaser Node Js terhubung dengan baik, ditandai dengan muncul nya RAM Di dashboard. tidak ada muncul error saat saya start dan stop Node JS, tapi kode QR masih tetap tidak muncul. Troubleshoot hanya itu saja yang merah, selebihnya hijau semua. saya sudah install ulang app node js di cpanel dan sudah ganti port. tetap saja. mohon bantuaannya

1 hour ago, Drive. C said:

@Magd Almuntaser Node Js terhubung dengan baik, ditandai dengan muncul nya RAM Di dashboard. tidak ada muncul error saat saya start dan stop Node JS, tapi kode QR masih tetap tidak muncul. Troubleshoot hanya itu saja yang merah, selebihnya hijau semua. saya sudah install ulang app node js di cpanel dan sudah ganti port. tetap saja. mohon bantuaannya

Cek console log

2 hours ago, Drive. C said:

@Magd Almuntaser Node Js terhubung dengan baik, ditandai dengan muncul nya RAM Di dashboard. tidak ada muncul error saat saya start dan stop Node JS, tapi kode QR masih tetap tidak muncul. Troubleshoot hanya itu saja yang merah, selebihnya hijau semua. saya sudah install ulang app node js di cpanel dan sudah ganti port. tetap saja. mohon bantuaannya

node server berjalan di http. sedangkan server web berjalan di https, anda harus mengeneret ssl server node anda supaya bisa berjalan di https dan menghasilkan QrCode

6 hours ago, Owgnor Nar said:

Dear @Magd Almuntaser , I am running the cron after creating the campaign, but it is still showing as in progress, it is not sending any messages, there is only a problem with the campaign part. I have made the latest update, and when we run the cron, it shows 0 on the screen.

Go to troubleshot page to see your problem..

3 hours ago, Drive. C said:

@Magd Almuntaser Node Js terhubung dengan baik, ditandai dengan muncul nya RAM Di dashboard. tidak ada muncul error saat saya start dan stop Node JS, tapi kode QR masih tetap tidak muncul. Troubleshoot hanya itu saja yang merah, selebihnya hijau semua. saya sudah install ulang app node js di cpanel dan sudah ganti port. tetap saja. mohon bantuaannya

As @wong said about http and https ..
and remove schedule-run from cronjob as @Imanudin said

All indicators are green. I installed it on aapanel, but the result remains like this. What's the solution?